All versions with camera raw support: Added support and profiles for raw images from Nikon D5000 and profiles for raw images from Canon EOS 1D Mark III.
All versions with camera raw.: Added raw camera profiles for Canon EOS 1Ds Mark III.
General: Scanning with enabled auto descreening in reflective mode could cause problems when scanning in transparency mode afterwards, this issue is fixed now
All versions with camera raw support: New supported raw cameras: Canon PowerShot G10, Casio Exilim EX-FH20, Nikon CoolPix P6000, Leica Digilux 3, Leica V-Lux 1, Olympus SP-565UZ, Panasonic FX150, Panasonic G1 and Sony Alpha 900.
Nikon LS-8000 & Nikon LS-9000: Added Offset Tool for Nikon LS 8000 + LS 9000 when using Medium Format Strip Holders
All versions with camera raw support: Implemented Canon sRAW format support.
All versions with camera raw support: Added profiles for already supported raw cameras Canon EOS 40D, Nikon D50, Olympus SP-320, Olympus E-400, Olympus SP-560 UZ, Olympus SP-570 UZ, Panasonic FZ8, Panasonic L1, Pentax K100D Super, Fuji FinePix S6500FD and Fuji FinePix S9600.
IMPROVEMENT:
all iSRD: Slight straightening of iSRD Workflow: formerly a new layer was created when the User ticked the SRD checkbox. Now it simply switches from iSRD to SRD, if the User wants to combine iSRD & SRD he has to create a new layer.
BUGFIX:
all Canon SDK: Sometimes after scanning some transparencies a colorcast started to show ( sometimes strong, sometimes weak ).
This was especially visible on the Canon 8800F, but also on other Canon Scanners. This instability has been fixed by changing the way we calibrate.
All versions with camera raw support: Bugfixed preview of raw images (in VLT) without embedded thumbnails.
all with PrinterProfilingWizard: The PrinterProfilingWizard has been augmented with another tool, the ProfileEditor, which allows to refine the neutrality of measured printer ICC profiles.
BUGFIX:
all HDR / DC etc.: Improve work flow of the DC-Pro-Target calibration.
Nikon LS-8000 and Nikon LS-9000: Now added Nikon LS-8000 and Nikon LS-9000 to supported scanners for the new NikonSF Version.
IMPROVEMENT:
All NikonSF: Changed Auto exposure for NikonSF Versions.
Now there is no Auto exposure Button anymore, Auto exposure will be done internally, no more extra scan for Auto exposure!
BUGFIX:
All NikonSF: Fixed Bug that could occur if using Multisampling and iSRD together.
General: Added Kodachrome Feature to Plustek Film Scanners 7200, 7200i, 7300 and 7500i, Heidelberg Scanners Topaz, NexScan, Tango, PrimeScan and Chromagraph, Quato IntelliScan 5000
Chromagraph Mac & PC: Added 48 / 16 Bit Output for Linotype Chromagraph Scanners.
Although they only deliver 24/8 Bit, we now allow users to Output the 48 Bit we use internally.
These data have been achieved by Log to linear Interpolation and is by far better then linear 24/8 Bit data.
IMPROVEMENT:
General: the IT8 calibration now requires a result deltaE value of less than 6.0 to be taken successful.
Nikon LS-8000 and LS-9000: Added a better way to scan Medium Format Filmstrips for the Nikon LS-8000 and LS-9000 ! Now there is a Format selection, similar to the Nikon Maid Version.
HDR, DC, and DCpro, etc.: The SilverFast HDR, DC, and DCpro versions now include all sets of NegaFix profiles.
General: iSRD Worflow and handling has been improved in Preview Dialog, especially when working with multiple layers
Chromagraph, Tango and PrimeScan: All LinoType Hell Drum Scanners now identify their Drum ID so one can prepare more then one drum before scanning !
All SE: Batch Scanning is now enabled for ALL SE Versions !
General: we added the following white balance profiles for the SilverFast DC line of Products:
Sony Alpha 100,
Leica V-Lux 1,
LEICA DIGILUX 3,
Pentax K200D,
Panasonic L10,
Pentax K200D,
Pentax K20D,
Ricoh GR Digital II,
Sony Alpha 200,
Sony Alpha 300,
Sony Alpha 350,
Nikon 35 mm Scanners: We added native Support for Nikon LS-5000, LS-4000, LS-50 and LS-40.
This means we no longer need Nikon Drivers to be installed on OS X for these scanners and are able to profide rock solid Leopard support for these Scanners
All flatbed scanners that can be IT8-calibrated: It is now possible to activate the new "Printer Profiling Wizard" by an appropriate serial number.
IMPROVEMENT:
CMS: Long file names of ICC profiles were listed truncated in the Option dialog's CMS panel. Now the full file name (without path) is used.
General: Added a Service Button to the Universal Launcher so the User can easily enter the Service Mode that allows to reset the serial number, reset the Preferences or to copy the SilverFast logfile to the desktop for sending it to support.
BUGFIX:
Microtek ScanMaker 9800 XL: Scans of high Multi-Sampling factors and large heights (in pixels) were scanned distorted.
Corrected this by reading the true image height from the scanner in an alternative manner.
Polski [change]
English
Deutsch
Français
Italiano
日本語
Español
Português
Russian
Chinese (Simp.)
Czech
Polski (tylko sklep)
